Induction Reheating Furnace

Billet Induction Reheating Furnace

COOLDO Billet Reheating Furnace is a non-standard furnace which can design and manufacture on basis of your requirements. we produced the reheating furnace with the electric indcution heating method, which the oxidization ratio in o.5% more less than the gas and fuel. These furnaces are mostly used in Steel Rolling Mills for heat the raw material up to proper temperature like the Billets, Blooms, Slabs,Scrap or Ingots.

Features

1, Easy operation and heating reliable
2, Uniform heating and less dust pollution.
3, Less temperature difference from core to surface,
4, Compact structure and strong over-load capacity

Induction Reheating for rolling mill Desciption:

 

reheating-furnace

Steel billet reheating furnace is a continuous heating profess furnace for hot rolling mills to reheat the work-piece like Billets, blooms, Scrap or Slabs. And the temperature of furnace can arrived at arround 1200° C which is suitable for plastic deformation of mild steel and hence for rolling in the mill.  Heat is transferred to the steel stock during its traverse through inductor. These furnaces are with sevral heating chamber with induction coil for achieving heating uniformall. The exit temperature of the billet is governed by the requirement of the process of rolling which is dependent on the rolling speed, stock dimension and steel composition.

 

Billet Induction Reheating Furnace Video:

 

billet-heating-furnace

Fill out my online form.