TL Laboratory Tube Furnace Description:
1. Temperature controller: 30 segment temperature controller with PID Intelligent adjustment
2. Door limit switch: Power source cut off as soon as open the door.
3. Chamber: The material used the alumina fiber material, good performance of heat preservation, high reflectivity
4. Heating elements: Resistance wire, silicon carbide rod, Silicon molybdenum rods, these used on basis of different temperaturr.
5. Leakage air switch: Automatically cut off the power as soon as the electricity leak or current exceed rated current.
6. Controlling system:
a, Power control: Chint; b, Controlled silicon: Germany Semikron 106/16E; c, Trigger: Phase-shift trigger
7. Sealing system: Sealing by O type silica gel seal ring at between furnace tube and flange, which can ensure 12 hours pressure keeping.
8, Vacuum system: we have three vacuum pump 10-1Pa, 10-3 Pa, TW-1.5A for the option.
9, Flange: Adopt the double ring sealing type, and the flange also have connector on it for connecting the resistive vacuum gage, KF25 bellow Tube etc.
10, Soft control system(Optional): The furnace have equipped the communcation interface and soft, which can control and see all the parameter through the computer. and will draw our the temperature rising curve chart at real time, storage all the record and callour anytime you want.